PRO MARINER 22074 60 AMP FAIL SAFE GALVANIC ISO
Price: $511.00
Product Description: ProMariner ProSafeFS Galvanic Isolator FailSafe Technology with Peace of Mind Dependability. The ProSafe FS Series will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. Built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.
- ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
- Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for the required duration period.
- Innovative Design: The FS60 will cool itself in the event it must conduct current insuring cooler operation in this mode
- Ignition Protected: Meets ISO 8846 and either model can be mounted within an engine compartment
- Gold Plated Terminations: Simply install in your on board green safety ground wire (between your AC inlet and your AC Panel) to separate your DC Bonding System from your Shore AC Green wire
ALT Part Numbers: PMR 22074, 06-8745
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pro Mariner
SKU:175-22074
UPC:031669220744
PRO MARINER 79018 INVERTER-CUP HOLDER 150W 12V
Price: $49.10
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Product Description: ProMariner ProSport Cup Holder Power Inverter 12V to 110VAC Fully Automatic, Electronic Power Inverter
- Converts 12V battery power to 110V AC up to 150 watts
- Extruded aluminum case. High surge capacity
- Power/status LED indicators
- One standard 110V AC receptacle
- Output short and input polarity protection
- Low battery shutdown
- Over-temperature and overload protection
ALT Part Numbers: PMR 79018, 51-5138
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pro Mariner
SKU:175-79018
UPC:031669790186
XANTREX TECHNOLOGIES 806-1010 PRO SERIES INVERTERS 1000W
Price: $678.78
Product Description: Pro Series Inverters 1000W Performance inverters designed for RVs and boats
Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. The XM 1000 and 1800 models are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed.
The Xantrex PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available.
Both XM 1000 and 1800 models are designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions.
Performance Features
Protection Features
Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. The XM 1000 and 1800 models are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed.
The Xantrex PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available.
Both XM 1000 and 1800 models are designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions.
- Full featured MSW with built-in transfer switch
- Plug electronics directly on the unit or hardwire
- Detachable remote panel
- Built-in 15A breaker to protect GFCI circuits
- Up to 25A pass through for hardwired loads
- Meets UL458 and FCC Class B standards
Performance Features
- 1000/1800W inverter easily powers TVs, small appliances, and other electronics
- Built-in 15A circuit breaker on AC pass-through
- Up to 15A/20A pass through for hardwired loads for XM1000/XM1800 respectively
- Digital remote control displays power output, AC source and battery voltage
- Detachable remote control can be mounted wherever convenient
- Conformal coated electronics provide moisture resistance
- Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)
Protection Features
- Battery over-voltage and under-voltage protection
- Over temperature shutdown
- Automatic overload protection
- Short-circuit protection
- Ground fault protection
ALT Part Numbers: XTX 8061010, 02-2813
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8061010
UPC:715535113520
XANTREX TECHNOLOGIES 806-1810 PRO SERIES INVERTERS 1800W
$839.09 Sale Price: $838.92
Product Description: Pro Series Inverters 1800W Performance inverters designed for RVs and boats
Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. The XM 1000 and 1800 models are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed.
The Xantrex PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available.
Both XM 1000 and 1800 models are designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions.
Performance Features
Protection Features
Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. The XM 1000 and 1800 models are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed.
The Xantrex PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available.
Both XM 1000 and 1800 models are designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions.
- Full featured MSW with built-in transfer switch
- Plug electronics directly on the unit or hardwire
- Detachable remote panel
- Built-in 15A breaker to protect GFCI circuits
- Up to 25A pass through for hardwired loads
- Meets UL458 and FCC Class B standards
Performance Features
- 1000/1800W inverter easily powers TVs, small appliances, and other electronics
- Built-in 15A circuit breaker on AC pass-through
- Up to 15A/20A pass through for hardwired loads for XM1000/XM1800 respectively
- Digital remote control displays power output, AC source and battery voltage
- Detachable remote control can be mounted wherever convenient
- Conformal coated electronics provide moisture resistance
- Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)
Protection Features
- Battery over-voltage and under-voltage protection
- Over temperature shutdown
- Automatic overload protection
- Short-circuit protection
- Ground fault protection
ALT Part Numbers: XTX 8061810, 02-2815
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8061810
UPC:715535113537
XANTREX TECHNOLOGIES 8061020 FREEDOM HF 1 KW 20A INV/CHARGR
Price: $898.95
Product Description: Freedom HF 1 KW 20A Inverter/Charger
- Economical, compact and lightweight
- Quick connect AC terminal block on both AC input and output for easy wiring and fast installation
- Plug electronics directly on the unit or hardwire
- Detachable digital remote
- Meets UL458 with marine supplement, CSA and FCC Class B
ALT Part Numbers: XTX 8061020, 03-3224
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8061020
UPC:715535890414
XANTREX TECHNOLOGIES 8061840 FREEDOM HF 1.8KW 40A INV/CHRGR
Price: $1,186.12
Product Description: Freedom HF 1.8KW 40A Inverter/Charger
- Economical, compact and lightweight
- Quick connect AC terminal block on both AC input and output for easy wiring and fast installation
- Plug electronics directly on the unit or hardwire
- Detachable digital remote
- Meets UL458 with marine supplement, CSA and FCC Class B
ALT Part Numbers: XTX 8061840, 03-3225
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8061840
UPC:715535890421
XANTREX TECHNOLOGIES 8061802 PROSINE 1800/12/120 HWIRE&XFER
Price: $2,553.59
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Xantrex PROsine⢠8061802 True Sine-Wave 1800 Watt Inverter, Hardwire Offering superior quality true sine wave output, the PROsineTM stand-alone inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. PROsine inverters include a backlit LCD display panel, which can be mounted remotely. Two year warranty.
- True sine wave AC output (crystal controlled)
- Removable LCD display can be mounted remotely for control and monitoring
- Unique DC terminals offer 180° connections for easy installation in tight places
- Powersave mode draws only 1.5 watts under no load
- Over temperature shutdown and automatic overload protection
- Over voltage and under voltage protection
- Short circuit and AC backfeed protection
ALT Part Numbers: XTX 8061802, 02-2814
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8061802
UPC:715535618025
XANTREX TECHNOLOGIES 815-2012 FDM SW 2012 INVERTER/ CHARGER
Price: $3,009.49
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Freedom SW Inverter/Chargers, 2000W, 12V Built-in hybrid functionality - combines shore or generator input with inverter output to power loads.
Dimensions: 7.75" x 13.5" x 15.25" (both models).
Dimensions: 7.75" x 13.5" x 15.25" (both models).
- Pure sine wave output
- Built-in transfer switch
- Power factor corrected multi-stage charger
- Temperature compensated
- Compatible with Flooded/Gel/AGM batteries
- Adjustable low battery voltage cut-off
- Automatic overload protection
- Battery temperature sensor included
- Automatic Generator Start capable
ALT Part Numbers: XTX 8152012, 26-0161
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8152012
UPC:715535897154
XANTREX TECHNOLOGIES 815-3012 FDM SW 3012 INVERTER/ CHARGER
Price: $3,614.89
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Freedom SW Inverter/Chargers, 3000W, 12V Built-in hybrid functionality - combines shore or generator input with inverter output to power loads.
Dimensions: 7.75" x 13.5" x 15.25" (both models).
Dimensions: 7.75" x 13.5" x 15.25" (both models).
- Pure sine wave output
- Built-in transfer switch
- Power factor corrected multi-stage charger
- Temperature compensated
- Compatible with Flooded/Gel/AGM batteries
- Adjustable low battery voltage cut-off
- Automatic overload protection
- Battery temperature sensor included
- Automatic Generator Start capable
- Dual input/dual output AC interface
ALT Part Numbers: XTX 8153012, 26-0162
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8153012
UPC:715535897192
XANTREX TECHNOLOGIES 809-0921 SYSTEM CONTROL PANEL
Price: $351.39
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: System Control Panel Featuring a graphical, backlit LCD screen, the System Control Panel (SCP) can monitor the Freedom SW Inverter/Charger and other devices connected to the Xanbus network
- Displays all system configuration and diagnostic information in one central location
- Provides basic controls for other devices connected to the network eliminating the need for separate control panels for multiple devices
- Compatible with both Freedom SW 2012 and 3012 inverter/chargers
ALT Part Numbers: XTX 8090921, 25-9733
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Xantrex Technologies
SKU:262-8090921
UPC:715535009212