FULTYME RV 1044 BALL MOUNT 2" STRAIGHT MT
Price: $34.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: FulTyme RV 1044 Trailer Ball Mount Corrosion resistant Black finish. Square receiver tube.
ALT Part Numbers: FRV 1044, 36-4475
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Fultyme Rv
SKU:590-1044
UPC:841345110449
PULLRITE 331705 SUPERGLIDE KIT LIPPERT LONG/MD
Price: $179.42
Product Description: Pullrite 331705 QuickConnect Capture Plate for Lippert King Pin Box Models Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plates wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331705 fits Lippert 1621, 1116, and 1716 models.
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 13-1/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3-3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".
Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.
1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.
2) To ensure correct fit, make the necessary A, B and C measurements:
A: Measure the king pin plate from side-to-side. This is the most
important measurement. Be sure that this measurement is no more
than 1/16 less than 13-1/4".
B: Measure from the leading edge of the king pin to the leading edge of
the king pin plate, which should be 3-3/8".
C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".
ALT Part Numbers: PLR 331705, 31-7218
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Pullrite
SKU:337-331705
UPC:816456010780
FULTON/WESBAR (CEQUENT) 45322 CLASS V BALL MNT.18K 3.5R5D
$140.19 Sale Price: $139.78
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Product Description:
ALT Part Numbers: FUW 45322, 31-2701
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Fulton/wesbar (cequent)
SKU:220-45322
UPC:016118072075
FULTON/WESBAR (CEQUENT) 45123 BALL MOUNT 2 1/2"
$111.69 Sale Price: $111.38
Product Description:
ALT Part Numbers: FUW 45123, 31-2700
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Fulton/wesbar (cequent)
SKU:220-45123
UPC:016118451238
BLUE OX BXW0756 HITCH-SWAYPRO 750LB 11-HOLE RE
Price: $878.90
Not In StockMay be available soon with price change.
Item may be special order or out of stock. Please call 321-952-1303 or Contact Us for price and availability.
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Blue Ox BXW0756 SwayPro Clamp On Latch 11 Hole Shank Weight Distributing RV Hitch SwayPro™'s innovative and unique features combine everything you are looking for in a weight distribution hitch with built-in sway control. The revolutionary Signature Series rotating latches safely and securely tighten the spring bar chains, controlling sway at the source. The SwayPro™ hitch head is chocked full of features you'll appreciate with the convenient grease zerks - no more messy spring bars or washers to adjust! Self-locking spring bars eliminate the need for pins and clips. All those features in one hitch, along with the ability to back up without disconnecting are what make SwayPro™ the most user friendly hitch on the market. Stinger fits standard 2" x 2" receivers.
11 Hole Hitch Shank - 11 hole adjustment (0" to 10"), 10" receiver stinger
- Easy hook up and disconnect
- Snap in spring bar design eliminates pins or clips
- Bars will not slip out and revolutionary rotating bracket
- Built-in sway control
- Durable powder coat finish
- Simple, precise weight distribution
- No noise
11 Hole Hitch Shank - 11 hole adjustment (0" to 10"), 10" receiver stinger
ALT Part Numbers: BLX BXW0756, 38-3315
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Blue Ox
SKU:123-BXW0756
UPC:798459090634
BLUE OX BXW0550 HITCH-SWAYPRO 550LB 7-HOLE
Price: $878.90
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Blue Ox BXW0550 SwayPro Clamp On Latch Standard Shank Weight Distributing RV Hitch SwayPro™'s innovative and unique features combine everything you are looking for in a weight distribution hitch with built-in sway control. The revolutionary Signature Series rotating latches safely and securely tighten the spring bar chains, controlling sway at the source. The SwayPro™ hitch head is chocked full of features you'll appreciate with the convenient grease zerks - no more messy spring bars or washers to adjust! Self-locking spring bars eliminate the need for pins and clips. All those features in one hitch, along with the ability to back up without disconnecting are what make SwayPro™ the most user friendly hitch on the market. Stinger fits standard 2" x 2" receivers.
Standard Hitch Shank - 7 hole adjustment (0" to 5"), 9" receiver stinger
- Easy hook up and disconnect
- Snap in spring bar design eliminates pins or clips
- Bars will not slip out and revolutionary rotating bracket
- Built-in sway control
- Durable powder coat finish
- Simple, precise weight distribution
- No noise
Standard Hitch Shank - 7 hole adjustment (0" to 5"), 9" receiver stinger
ALT Part Numbers: BLX BXW0550, 31-5247
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Blue Ox
SKU:123-BXW0550
UPC:798459010403
BLUE OX BXW1000 HITCH-SWAYPRO 1000LB 7-HOLE
Price: $878.90
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Blue Ox BXW1000 SwayPro Clamp On Latch Standard Shank Weight Distributing RV Hitch SwayPro™'s innovative and unique features combine everything you are looking for in a weight distribution hitch with built-in sway control. The revolutionary Signature Series rotating latches safely and securely tighten the spring bar chains, controlling sway at the source. The SwayPro™ hitch head is chocked full of features you'll appreciate with the convenient grease zerks - no more messy spring bars or washers to adjust! Self-locking spring bars eliminate the need for pins and clips. All those features in one hitch, along with the ability to back up without disconnecting are what make SwayPro™ the most user friendly hitch on the market. Stinger fits standard 2" x 2" receivers.
Standard Hitch Shank - 7 hole adjustment (0" to 5"), 9" receiver stinger
- Easy hook up and disconnect
- Snap in spring bar design eliminates pins or clips
- Bars will not slip out and revolutionary rotating bracket
- Built-in sway control
- Durable powder coat finish
- Simple, precise weight distribution
- No noise
Standard Hitch Shank - 7 hole adjustment (0" to 5"), 9" receiver stinger
ALT Part Numbers: BLX BXW1000, 31-5249
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Blue Ox
SKU:123-BXW1000
UPC:798459010427
FULTON/WESBAR (CEQUENT) 80791 MULTI-TOW/TRIPLE TOW BLK 80408
Price: $114.04
Product Description:
ALT Part Numbers: FUW 80791, 31-2923
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Fulton/wesbar (cequent)
SKU:220-80791
UPC:016118107258
BLUE OX BXW4012 KIT-HITCH HEAD-UNDERSLUNG
Price: $254.10
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Blue Ox BXW4012 SwayPro RV Weight Distribution Hitch Head Kit for Underslung Couplers RV hitch head replacement part kit for SwayPro weight distributing hitch.
ALT Part Numbers: BLX BXW4012, 38-3394
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Blue Ox
SKU:123-BXW4012
UPC:798459086491
FULTON/WESBAR (CEQUENT) 56034-53 5TH WHL CUST QCK INSTLL BRKTS
Price: $844.09
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Reese 56034-53 Outboard Fifth Wheel Custom Quick Install Kit Includes Model Speciifc Brackets and Mounting Rails.
See Reese fitment data for specific application information.
See Reese fitment data for specific application information.
ALT Part Numbers: FUW 5603453, 38-0528
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Brand: Fulton/wesbar (cequent)
SKU:220-5603453
UPC:016118143584